Tannins are polyphenolic compounds extracted from various tree species and used in variousmapplications such as adhesives, composites, pharmaceuticals, medicines, and food and beverage production (Mubarak et al. 2023). However, tannins, especially condensed tannins, have limited reactivity with wood. Consequently, to effectively modify wood, cross-linkers and other reactive chemicals or additives must be used. In this work, we have introduced a bio-based cross-linker in a 20% tannin (Quebracho) aqueous solution. Five levels of cross-linker (0, 2, 10, 20 and 40% of total tannin solid) were used to modify Scotspine (Pinus sylvestris L.) sapwood with dimensions of 25 × 25 × 10 mm³ (radial × tangential × longitudinal). Full-cell impregnation was applied with a 60 min vacuum and pressure for 60 min. Samples were kept at room condition for 24 h, stepwise dried to avoid drying defects and cured at 140 °C for 10 h. Modified wood samples are shown in Figure 1. Weight percentage gain (WPG) and bulking coefficient (BC) after water leaching for 5 days were measured according to Donath et al. (2004).