lnu.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Effect of laser drilling on impregnability of fir (Abies borisii regis) and spruce (Picea excelsa) wood
Aristotle University of Thessaloniki, Greece.
Aristotle University of Thessaloniki, Greece.
Technological Educational Institute of Thessaly, Greece.
Technological Educational Institute of Thessaly, Greece.ORCID-id: 0000-0002-6909-2025
Visa övriga samt affilieringar
2014 (Engelska)Ingår i: Wood Structure, Properties and Quality – 2014: 5th RCCWS International Symposium, Moscow State University Press, 2014, s. 51-56Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Fir and spruce wood specimens, 2×2 cm in cross section and 34 cm long, were pre-pared with true radial and tangential surfaces. All lateral surfaces of the wood specimens were drilled by laser beams to a depth of 0,4 cm (1/5 of specimen thickness) with two drilling patterns (distance between holes 1×1 cm and 1×2 cm) in order to improve the wood permea-bility of these refractory to impregnation species. After drilling and assessing the drilling ef-fect on mechanical properties of wood, wood specimens, 10 cm long, were impregnated with oil and CCB preservatives by using vacuum (0,6 mmHg) and pressure (1,5 bar) for 15 minutes and 30 minutes, respectively. The effects of the two laser drilling patterns on impreg-nability of fir and spruce wood specimens were measured and assessed. The results showed that both drilling patterns created by laser beams on all lateral surfaces of fir and spruce wood specimens at 0,4 mm depth improved the retention and penetration of preservatives in fir and spruce wood specimens. This effect was more pronounced in fir than in spruce. Between the two drilling patterns, the pattern with distances between holes 1×1 cm was more effective than that with distances 1×2 cm, in both species tested.

Ort, förlag, år, upplaga, sidor
Moscow State University Press, 2014. s. 51-56
Nyckelord [en]
fir/spruce wood, laser drilling, impregnability, retention, penetration
Nationell ämneskategori
Trävetenskap
Forskningsämne
Teknik, Skog och träteknik
Identifikatorer
URN: urn:nbn:se:lnu:diva-41834ISBN: 978-5-8135-0625-3 (tryckt)OAI: oai:DiVA.org:lnu-41834DiVA, id: diva2:800890
Konferens
5th RCCWS International Symposium “Wood Structure, Properties and Quality – 2014”, September 22 – 25, Moscow–Mytischi, Russia
Tillgänglig från: 2015-04-08 Skapad: 2015-04-08 Senast uppdaterad: 2017-01-13Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Konferensens webbplatsKonferensprogram

Personposter BETA

Adamopoulos, Stergios

Sök vidare i DiVA

Av författaren/redaktören
Adamopoulos, Stergios
Trävetenskap

Sök vidare utanför DiVA

GoogleGoogle Scholar

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 84 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf