lnu.sePublications
Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
The effect of inoculant amount and casting temperature on metal expansion penetration in grey cast iron
Jönköping University. (Maskinteknik)ORCID iD: 0000-0003-0453-0503
Jönköping University.
1999 (English)Report (Other academic)
Resource type
Text
Abstract [en]

The composition of the inoculant, containing different elements, as well as inoculant amount have been shown to play an important role in solidification of cast iron. Three different inoculant amounts and different pouring temperatures were used on a commercial casting. From the results of the ocular inspection of the castings, the eutectic cell size and distribution measurements, it can be concluded that nucleation of the eutectic cells plays an important role in formation of the expansion penetration. The castings show two different types of surface defects; namely, bulb and metal expansion penetration. The mechanisms of bulb and formation metal expansion penetration seems to be related. The influence of the melt casting temperatures showed the following results; by using a lower temperature the degree of metal penetration was reduced but the bulb formation is unchanged. This is applies to experiments using 0.15 % and 0.30 % inoculant. The amount of inoculant added shows a clear effect on the degree of metal penetration. The expansion penetration disappeared at 0.05 % addition at the two highest pouring temperatures although at the lowest temperature some penetration did occur. The low temperature did not show any tendency to form white solidification in this casting components. The pouring temperature seems to have a large influence in combination with high additions of inoculants. A low pouring temperature seems to increase the formation of bulbs caused by excess material at solidification. 2 The mechanism of bulb formation is proposed to depend on formation of a thin solidified layer when the metal has filled the mould. The shell is thin, and a later expansion of the metal, during solidification pushes the shell outward and forms a bulb, instead of bursting and metal penetration of the sand mould.

Place, publisher, year, edition, pages
Jönköping: Ingenjörshögskolan , 1999. , p. 10
Series
JTH research report, ISSN 1404-0018 ; 1999:3
Keywords [en]
Grey cast iron, Metal expansion penetration, Inoculant, Casting temerature, Inoculation
National Category
Applied Mechanics
Research subject
Technology (byts ev till Engineering)
Identifiers
URN: urn:nbn:se:lnu:diva-51049OAI: oai:DiVA.org:lnu-51049DiVA, id: diva2:912912
Available from: 2016-03-18 Created: 2016-03-18 Last updated: 2016-04-08Bibliographically approved

Open Access in DiVA

fulltext(1359 kB)19 downloads
File information
File name FULLTEXT01.pdfFile size 1359 kBChecksum SHA-512
a572354e17231b56dcbc35b4f434c86dfc667f025a06eeeece01fd3d9c1f2450138875ac771c3f12789b4a2bf597399261d858c980bfb0308d13f54e97cd000b
Type fulltextMimetype application/pdf

Other links

Fulltext

Authority records BETA

Dugic, Izudin

Search in DiVA

By author/editor
Dugic, Izudin
Applied Mechanics

Search outside of DiVA

GoogleGoogle Scholar
Total: 19 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

urn-nbn

Altmetric score

urn-nbn
Total: 63 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf