Swedish forestry could benefit from maintaining a greater proportion of broadleaved species in the otherwise conifer-dominated stands, since greater species diversity may improve forest resilience to disturbances. Furthermore, the demand for Swedish roundwood is predicted to continue increasing, with many projects and studies now focused on hardwood utilization. Despite a growing interest in broadleaved tree species, in recent years the number of hardwood sawmills has been declining and there is limited information about their locations and capacity.

In this work, 21 hardwood sawmills were surveyed to identify mill locations and details about their log inputs. Questions related to species and volumes used, where raw material was sourced from, and what end products were manufactured. Additional questions were asked about their most significant threats and opportunities and their level of optimism regarding the future of hardwood sawmilling in Sweden.

Survey respondents mainly processed oak and birch, approximately 87,000 and 42,000 m³sub/year, respectively (combined totals for all sawmills). The beech, alder and ash volumes were in the 1,000s of m³sub/year. All the participating hardwood sawmills were located in southern and central Sweden. The sawmills produced a range of products, including sawn timber, flooring, tabletops, fine joinery, matches and toothpicks. Most of the birch volume was used for furniture components, while oak was widely used to restore or refurbish buildings and in public outdoor environments.

The surveyed sawmills were small and source most of their inputs from nearby suppliers. Few sawmills were importing raw materials, and where imports did occur, they were generally for oak. Common issues identified when importing wood included: unreliable wood quality, high transport costs and a desire to support local suppliers.

The sawmills were optimistic about their future and the Swedish hardwood sawmilling industry. As the mills are small, they have greater flexibility and can make decisions faster, which was perceived as a competitive advantage. Sweden has a continuing demand for hardwood timber, which may encourage forest managers to invest more in broadleaved tree species. 

Birch has long suffered from a lack of active forest management, leading many researchers to use material without a detailed management history. Data collected from three birch (Betula pendula Roth, B. pubescens Ehrh.) sites in southern Sweden were analyzed using regression analysis to detect any trends or differences in wood properties that could be explained by stand history, tree age and stem form. All sites were genetics trials established in the same way. Estimates of acoustic velocity (AV) from non-destructive testing (NDT) and predicted AV had a higher correlation if data was pooled across sites and other stem form factors were considered. A subsample of stems had radial profiles of X-ray wood density and ring width by year created, and wood density was related to ring number from the pith and ring width. It seemed likely that wood density was negatively related to ring width for both birch species. Linear models had slight improvements if site and species were included, but only the youngest site with trees at age 15 had both birch species. This paper indicated that NDT values need to be considered separately, and any predictive models will likely be improved if they are specific to the site and birch species measured.

This study investigated whether improved downy birch could perform as well as improved silver birch, and whether there was sufficient genetic variation and control for non-destructive testing (NDT) values to include them as selection traits in breeding programs. NDT tools were applied to a 15-year-old downy birch family trial intermixed with improved silver birch. Average diameters, fissured bark height, and grain angle were higher for silver than downy birch. The genetic analysis for downy birch provided estimates of narrow-sense heritability (h2) for acoustic velocity and Pilodyn penetration depth that were above 0.3 but had low genetic variation. Grain angle had relatively high genetic variability (18%) and an h2 of 0.20. A subsample of 49 trees had 4 mm cores x-rayed for wood density estimates, and 34 stems had 12 mm cores macerated for cell measurements. t-tests revealed that average wood density and cell measurements were not significantly different between species. For silver and downy birch, fiber length and vessel length increased between inner and outer measurement positions, and fiber length was reasonably correlated with acoustic velocity. Silver birch tended to have denser and stiffer wood, while downy birch had less rough bark and straighter grain, and these results are in agreement with existing knowledge. The h2 values were similar to those observed in other birch species and indicate there is potential to breed for improved wood density and grain angle in downy birch.

Swedish tree species of birch (silver: Betula pendula and downy: B. pubescens) are often neglected during forest management activities, resulting in low value logs. This thesis investigated birch stem characteristics and wood properties important for solid wood products, in genetics and management trials in southern Sweden. As well as visual stem size and form measurements, non-destructive testing and evaluation (NDT) tools were used to indirectly estimate wood density (hardness), wood stiffness, and grain angle.

The results of this work suggest that for the 19-year-old silver birch and 15-year-old downy birch sites, important solid wood traits were under a reasonable degree of genetic control. It seems possible to breed birch to improve grain angle since heritability and genetic variation was high for this trait. Silver birch genotypes are expected to perform similarly across sites. At a site with both birch species, silver birch was larger with denser wood than downy birch. Few genetic correlations between measurements means selection for one trait will not inadvertently affect another trait. The radial density profiles showed density was continuing to increase. Acoustic velocity (AV) and fibre length were highly correlated, hardness and density were related, and ring width was related to ring density. 

In a 35-year-old planted Norway spruce stand, naturally regenerated birch AV was not different between treatments (20% or 50% of plot trees were birch by number). However, a correlation was observed between DBH and AV. This older site may reflect common Swedish conditions since planting birch is rare, and likely had more mature birch wood than the genetics trials. 

Although meeting an immediate need for studies of birch wood properties from managed stands, this work covered few sites. To meet this limitation the tools and techniques applied in this thesis could be used in further studies. The results of this thesis work will be of interest to forest managers who want to breed birch, or select birch stands, for solid wood products.

This study investigates wood density and anatomy of juvenile silver birch stems in Sweden,grown in mixed conifer stands. Our aim is to investigate if fertilization provides increased growth, aswell as an eventual reduction in stem wood density. Measurements of basic density, ring width, cellwall thickness, and vessels are analyzed for 20 birch trees. Bark to pith radial sections are analyzedusing a light microscope and the freeware ImageJ to compare treatments and ages. The results showthat trees with fertilizer treatment have wider growth rings and thinner cell wall thickness comparedto unfertilized trees. The fertilized trees also have a lower cambium age at the same height and thesame diameter, and a slightly lower stem mean density (420 kg m³) than the unfertilized stems(460 kg m³). Fertilizer is a significant determinant of density and cell wall thickness in nonlinearmodels. The fertilized trees have increased growth and reached a fixed diameter earlier. The agedifference between the trees likely explains some of the differences in cell wall thickness. This studysupports the use of fertilizer as a silvicultural option for increasing the growth rate of silver birch fora relatively small reduction of wood density.

This study investigated heritability of stem and wood traits to improve Swedish silver birch (Betula pendula Roth.) through breeding. Birch is 12% of Sweden’s forest area but mainly used for low value pulp or firewood. This paper applied non-destructive test (NDT) methods, and estimated traits’ heritability (h2), to help breed birch for high value solid wood products. Two trials of 22 families were assessed at age 19 for stem diameter (DBH), stem straightness, rough brown bark height (BH), grain angle (GA), Pilodyn penetration depth (Pilo) and acoustic velocity (AV). X-ray densitometry was performed on a subsample of radial cores taken at 1.3 m from the ground to get an average benchmark density. The h2 values were moderate for GA (0.20 and 0.21) and Pilo (0.53 and 0.48) at the two sites, but the h2 values for AV were low (0.05 and 0.30). There were moderate genotypic correlations between BH and DBH (0.51–0.54). There were low genotypic and phenotypic correlations between NDT measurements and other traits so including NDT in birch breeding efforts should not inadvertently reduce size, stem or wood quality. The high genetic correlations between sites suggest that GA, Pilo and AV values were determined more by genotype than by environment.

Background: Additivity has long been recognised as a desirable property of systems of equations to predict the biomass of components and the whole tree. However, most tree biomass studies report biomass equations fitted using traditional ordinary least-squares regression. Therefore, we aimed to develop models to estimate components, subtotals and above-ground total biomass for a Pinus radiata D.Don biomass dataset using traditional linear and nonlinear ordinary leastsquares regressions, and to contrast these equations with the additive procedures of biomass estimation.

Methods: A total of 24 ten-year-old trees were felled to assess above-ground biomass. Two broad procedures were implemented for biomass modelling: (a) independent; and (b) additive. For the independent procedure, traditional linear models (LINOLS) with scaled power transformations and y-intercepts and nonlinear power models (NLINOLS) without y-intercepts were compared. The best linear (transformed) models from the independent procedure were further tested in three different additive structures (LINADD1, LINADD2, and LINADD3). All models were evaluated using goodness-of-fit statistics, standard errors of estimates, and residual plots.

Results: The LINOLS with scaled power transformations and y-intercepts performed better for all components, subtotals and total above-ground biomass in contrast to NLINOLS that lacked y-intercepts. The additive model (LINADD3) in a joint generalised linear least-squares regression, also called seemingly unrelated regression (SUR), provided the best goodness-of-fit statistics and residual plots for four out of six components (stem, branch, new foliage and old foliage), two out of three subtotals (foliage and crown), and above-ground total biomass compared to other methods. However, bark, cone and bole biomass were better predicted by the LINOLS method.

Conclusions: SUR was the best method to predict biomass for the 24-tree dataset because it provided the best goodness-of-fit statistics with unbiased estimates for 7 out of 10 biomass components. This study may assist silviculturists and forest managers to overcome one of the main problems when using biomass equations fitted independently for each tree component, which is that the sum of the biomasses of the predicted tree components does not necessarily add to the total biomass, as the additive biomass models do.

Non-destructive testing of wood density, as is already done for Eucalyptus, can allow for earlyselection of birch trees for breeding programmes and stands for harvesting. In this work, external stemquality traits were visually assessed in a family trial of downy (Betula pendula) and silver (B.pubescens) birch in southern Sweden. A subsample of trees was measured for wood density using thePilodyn resistometer portable NDT tool. An X-ray microdensitometric analysis of the subsample oftrees was completed using the Itrax X-ray machine for increment cores taken from the south face,through the pith to the north bark at 1.3 m stem height. The Pearson’s r value for Itrax density andPilodyn density was high (0.580 for downy birch and 0.795 for silver birch), and this correlationmeans Pilodyn should provide a good estimate of average birch wood density. Neither species hadstable wood density values at age 13 and both species’ density increased over time from pith to bark.Ring width influence on stem density was minor or non-existant, and may vary between birch species